Compact Duct AC Installation Guide To Help Plan The Location Of Ducts, AC Units And Plenums

If you are looking for an efficient solution to retrofit your home with modern AC, compact ducts can be a great solution for this project. The AC installation of a compact system will require good planning, and you will want to decide where ducts, plenums, and the AC unit will be installed. The following compact duct AC installation guide will help you with planning to retrofit your home with modern AC this summer:

First, Contact The AC Installation Service To Decide The Size AC Unit You Need and Where It Will Be Installed

The first thing that needs to be done is to decide the size of the AC system that needs to be installed in your home. You are going to want to decide where the system is going to be installed, which should be in an inconspicuous place on the exterior. In addition, you may want to build a small wood enclosure to protect the AC and keep the exterior design of your home attractive if it is going to be in a visible location.

Locate All The Wiring, Pipes and Utilities To Begin Planning The Location of Compact AC Ductwork

The compact ducts that will be installed with your AC are about the same size as plumbing drain lines, but you will want to make sure that mechanical installations are not in the way. Therefore, it is a good idea to locate the electrical wiring, plumbing, and other installations in walls or other areas. The compact ductwork will need to be installed around these existing utilities.

Deciding Where You Are Going To Install The Main Plenum To Deliver Cooling To The Compact Ductwork

The plenum of air conditioning is the box where cool air is distributed through ducts to different areas of your home. This is the largest component of a compact system, and you will need to find a place to install it, which can be in an attic, crawl space, or utility closet. Talk with the AC installation contractor about the best place to locate the plenum for your compact ducts.

Work With The AC Installation Service To Determine Where To Install The Air Vents For Your Compact Ducts

Another important decision when installing a compact duct system is choosing where to locate the vents. These vents should be planned with interior design in mind for performance and to prevent cold air from directly blowing on you. Talk with the AC installation service about choosing locations that provide cooling to entire rooms without blowing directly on seating, beds, or other furniture.

This information will help you decide where to install the ducts, plenum, and AC unit when you retrofit your home with modern compact duct AC. If you want to add air conditioning to your home to survive the summer heat, contact an AC installation service like Vigil Air to start planning a compact duct system for your home.